This guide will show you how to root the popular Samsung Galaxy Note 3 phone from Samsung.

Disclaimer: Digital Endpoint is not responsible for rooting the Android device in any way. Before performing any of these steps make sure you back up your Android device completely.

Rooting is done entirely by you at your own risk.

What is needed to root the Samsung Galaxy Note 3?

In order to root the Samsung Galaxy Note 3 you will need the following.

• The Samsung Galaxy Note 3 you want to root in your hand.
  
• A PC.
  

Step 1 – Download the USB drivers for the Samsung Galaxy Note 3 for your PC

In order for your PC to recognise the Samsung Galaxy Note 3 as part of the rooting process you first must download and install the USB drivers on to your PC.

You can download the USB drivers for the Samsung Galaxy Note 3 from here.

Once you have downloaded them run the main program file to make sure the drivers are installed.

Step 2 – Download the Odin rooting program

In order to root the Samsung Galaxy Note 3 using the root file given in the next step you must first download Odin which is what will be used to install the root file on to the Samsung Galaxy Note 3 and perform the rooting process.

You can download Odin from here.

Once downloaded extract the file to a convenient location such as the desktop.

Step 3 – Download the Samsung Galaxy Note 3 root package

Now that we have installed the Samsung Galaxy Note 3 USB drivers and downloaded Odin we now need to download the root package to be used for the rooting process.

You can download the Samsung Galaxy Note 3 root package from below. Make sure you have the correct version for your Galaxy Note 3 (Apps > Settings > About Phone > Kernel Version).

• SM-N900 (International Exynos): CF-Auto-Root-ha3g-ha3gxx-smn900.zip
  
• SM-N9005 (International Qualcomm): CF-Auto-Root-hlte-hltexx-smn9005.zip
  
• SM-N900T (T-Mobile US): CF-Auto-Root-hltetmo-hltetmo-smn900t.zip
  
• SM-N900S (untested): CF-Auto-Root-hlteskt-hlteskt-smn900s.zip
  
• SM-N900W8 (untested): CF-Auto-Root-hltecan-hlteub-smn900w8.zip
  
• SM-N9002: CF-Auto-Root-hlte-h3gduoszn-smn9002.zip
  

Step 4 – Enable USB debugging on the Samsung Galaxy Note 3

In order for your PC to recognise the Samsung Galaxy Note 3 when you plug it in to perform rooting you must first enable USB debugging on the phone itself. This is done by doing the following.

1. Tap the Settings option.
   
2. Tap the About Phone option.
   
3. Keep tapping the Build Number option (seven times) until it says you are a developer.
   
4. Tap the new Developer Options menu that appears.
   
5. Make sure that the USB Debugging option is checked.
   

Step 5 – Root the Samsung Galaxy Note 3

Now that we have all we need it is time to root the Samsung Galaxy Note 3. Before we can do that you must first put the Samsung Galaxy Note 3 in to Download mode which can be done using the following steps.

1. Make sure the Samsung Galaxy Note 3 is powered off completely.
   
2. Hold down the Volume down key and the Home key and the power button and keep all three buttons pressed until the Samsung Galaxy Note 3 powers up.
   
3. Providing you have done it correctly it should boot in to Download mode and you press the Volume up key to start Download mode.
   
4. Connect the Samsung Galaxy Note 3 now to your PC.
   
5. Run the Odin software you downloaded in step 2.
   
6. Inside Odin click the AP option and browse on your computer to the root zip file you downloaded in step 3.
   
7. Inside Odin click Start to begin the root process.
   

The process will take a few moments after which the Samsung Galaxy Note 3 will restart itself and complete the rooting process – Do not remove the Samsung Galaxy Note 3 from your PC during this time.

Once the Samsung Galaxy Note 3 starts up properly simply go to Apps and look for the SuperSU icon that should now be present. If you can see this icon it means that the Samsung Galaxy Note 3 has been successfully rooted.